However, a sudden, unforeseen water leak from the bottom of Philips Saeco Xelsis machine might swiftly flood your kitchen countertop.
The Saeco Xelsis machine has a problem that frequently leaks water.
But the machine user will undoubtedly find it bothersome and frustrating.
Imagine your feelings if you had to get up early in the morning to finish the task you started the previous night and start the Saeco Xelsis machine to make coffee for your morning perk.
Instead of new coffee, however, the kitchen was covered in water that was leaking from the machine.
So annoying, right?
It is not just annoying, but the water leaking issue with your coffee machine can be quite harmful to your machine as well.
If not fixed in time, it can lead to bigger problems that can cost you both your time and a lot of money on machine repair later on.
In this article, I will help you save both your time and money.
The three major causes of the water leaking problem in your Philips Saeco Xelsis espresso maker are outlined here, along with their three straightforward fixes.
The water tank on your machine is improperly positioned, which is the main cause of this.
As a result, you can notice clear water next to the machine’s water tank or underneath it.
Put the water tank in the machine properly, and that will stop the water from leaking out the bottom.
This is just one of the causes and fixes for the Saeco Xelsis machine’s water leakage problem.
To learn about all the major issues that lead to water leaking from the bottom of this machine, keep reading this text.
And also, I am providing their simple solutions so that you can quickly fix those problems on your own.
3 Main Reasons Why Saeco Xelsis Leaks Water from The Bottom
You will still notice water pouring out of the drip tray even if you save the rinsing water from the coffee spout in a cup or glass.
This is due to the fact that when making coffee or automatically washing, the coffee maker drains water from the inside directly to the drip tray.
There is really nothing to worry about because this is the technique that occurs most frequently in the Philips Saeco Xelsis machine.
Reason 2: The Drip Tray is too Full
You should empty and clean the drip tray of your coffee machine every couple of days to ensure no water leaks from it.
If not, the drip tray can be too much full of water and it will spill the water from it outside the area of the machine, causing you a big headache and trouble.
Reason 3: The Rubber Inserts on the Drip Tray are Damaged
The removable drip tray of your Saeco Xelsis machine comes with two rubber inserts on the back side.
They are made to guarantee that the tray is securely fastened to the apparatus.
The drip tray separates from the machine when they are worn out or damaged.
After that, whenever the machine does automatic rinsing or coffee brewing, water begins to flow from that location.
These three issues are the main reasons why the bottom of your Philips Saeco Xelsis leaks water.
Recommended Articles for You:
3 Simple solutions to Fix Water Leakage of Philips Saeco Xelsis Coffee Machine
In the previous section, we came across three possible reasons for the water leakage in your Philips Saeco Xelsis coffee machine.
Solution 1: Let the Machine Drain Water as it Does
When the machine is working, you don’t need to worry.
It consistently drains rinse water into the drip tray while automatically brewing coffee.
Just let it do its work and place some cotton cloth underneath the machine so that it can absorb the spilled water.
The drip tray is made to store water coming out from the coffee machine.
Usually, the tray becomes full every couple of days or when you use the coffee machine more often than regular.
Then, you may see water coming out from it and spreading around the area.
To fix this issue, just empty the removable drip tray and clean it with a soft cotton cloth.
Solution 3: Fix or Replace the Old Rubber Inserts
A key component of the Philips Saeco Xelsis coffee maker is the detachable drip tray.
In addition to the water used to brew the coffee, it also holds the washed water that is released during the machine’s automatic rinsing.
To ensure a compact attachment to the machine, this drip tray has two rubber inserts on the back.
The connection between the tray and the machine loosens when the rubber inserts are broken or removed.
And when this occurs, the machine’s water output begins to leak instead of pouring into the drip tray.
You must fix the rubber inserts and attempt to re-insert them into the tray in order to fix the problem.
If not, you will need to get a new pair of rubber inserts for the drip tray.